🔧 Elevate Your 3D Printing Game!
The SainSmart 1.75mm Black ePA-CF Carbon Fiber Filled Nylon Filament is a high-performance 3D printing material, combining 75% nylon and 25% carbon fiber for enhanced strength and flexibility. With a lower shrink rate and increased wear resistance, this filament is ideal for creating robust industrial parts, medical equipment, and intricate designs. For optimal results, a 0.6mm or larger stainless steel nozzle is recommended.
| Color | Carbon Fiber |
| Material Type | Carbon Fiber |
| Item Diameter | 1.75 Millimeters |
| Item Weight | 1 Kilograms |
C**Y
Arrived as advertised
Have not tested yet, but the value for money was good. Will update my review after testing
M**.
Easy to print PA-CF
This is surprisingly easy to print. I have an all-metal hotend setup with a bondtech LGX extruder and an E3D Nozzle X and I can happily print this at 250C nozzle, 65C bed at 120mm/s and 3mm retraction. I use glue on a PEI plate to help with adhesion and release. I get no stringing, well bonded layers and minimal warping when printing with a brim.
M**A
Is Not ePA-CF but the more "normal" PACF from sainsmart
The roll that came, said clearly 25%CF and 75% nylon. no mention of PA12.ePACF from sainsmart is only 15% CF and 85% PA12.This filament requires HEAVY drying (24h 80 degrees) rather than the PA12 that doesn't needs any drying.I had to stick with it and getting decent results after doing the right steps and tunning, but the fact that is not as advertised ANNOYS ME A LOT, as I was after the low grade more user friendly low faf good results of the ePACF not the normal one.All said really, not what it says in the advert.
S**H
Very Poor
Spent to much time trying to get this filament to work, but it wouldn’t. Not sure if it’s a poor roll but a complete waste of money.
Trustpilot
4 days ago
2 days ago
